Apply for Agency/Distributionship

N.C Wood Grain Filler Clear Premium | JCK

clear wood grain filler

Product Description

JCK - N.C Wood Grain Filler Clear Premium is Nitrocellulose based filler for wood.

Performance Features & Benefits

JCK - N.C Wood Grain Filler Clear Premium is a quick drying product. Its faster drying characteristic helps in completing wood finishing job faster. Product shows very good transparency and sand ability.

Recommended Usage

JCK - N.C Wood Grain Filler Clear Premium can be used for grain filling activity of Veneers and Natural wood.

Recommended Application

Sand the surface with emery paper No. 180 followed by 320. Clean off any dust and loose particles. Apply JCK - N.C Wood Grain filler with putty knife on veneer or natural wood surface. If required use NC Thinner for adjusting viscosity. Sand it after 1⁄2 an hour with emery paper No 320. Wipe the surface to clean off loose dust particles. It can be over coated with JCK - N.C Sanding Sealer and JCK - N.C Clear topcoats.

Technical Data

  • a) Coverage*:- Approx. 4 – 5 sq.mtr/kg/coat. (It depends on type of wood and thickness of film.)
  • b) Drying Time: - Dry to touch time ~ 15 minutes, recoating time ~ 30 minutes.
  • c) Flash Point : (IS 101/1987, Part 1, Sec 6) : below 5°C (41° F)
  • d) Shelf Life: 2 Years from the date of manufacture in original tightly kept away from direct sunlight and excessive heat.

Pack size availability:

500 gms 1 Kg 4 Kg 20 Kg

This Information is issued by JCK Coating Industries, Bldg No.377, A-1, Sector IV, Kandla Special Economic Zone, Gandhidham(Kutch)-370230, Gujarat, India. However JCK Coating Industries shall not guarantee for any specific product features and shall not establish a legally valid contractual relationship.


Chat With Us