Apply for Agency/Distributionship

Light Weight Body Filler - Body Filler For Wood | JCK

Light Weight Body Filler For Wood

Product Description

JCK Light Weight Body filler is a two component unsaturated polyester resin based filler for filling of dents and imperfections on metal substrates.

Performance Features & Benefits

JCK Light Weight Body filler is an easy to apply and quick drying product. The Product offers excellent adhesion with high elasticity and high filling power. It has good rheological properties so filled surface can be leveled uniformly without pin holing or bubbling. Dry and wet sanding is recommended for smoothening of the surface.

Recommended Usage

JCK Light Weight Body filler can be used for finishing of bare metal e.g. Steel, Galvanized Iron and Aluminum or on cured primer surface applied substrates. It is recommended to use for filling dents, cracks and unevenness on metal surfaces.

Recommended Surface Preparation, Application Procedure & Sanding process

Before application, the surface should be dry, clean and free from oil, grease, loose particles, dust etc. Sand down the surface with P180 no. emery paper & clean the surface with dry clothes in final step. Mix desired amount of JCK light weight body filler with approximately 2 % hardener paste on clean, flat, non — porous surface. Mix thoroughly to a uniform colour using a plastic spreader or putty knife. Mix with firm pressure using smooth back & forth wiping motion. Now, apply a thin layer of the mixture with putty knife on to the prepared surface. Employ enough pressure to assure maximum adhesion work up thickness & overlap edges of damaged area and to eliminate any air bubbles. (Note: Do not return unused mixed material back in the can.)

Sanding should be done using coarse sand paper such as P80 no. emery paper and finer sanding for featheredging with P180 no. emery paper. After, hard drying can apply primer and paint as required.

Technical Data

  • Appearance:Thixotropic paste type
  • Specific Gravity in Kg. / Ltr. : 1.45/-0.03
  • % Solids in weight : 89+/-2
  • Colour : White
  • Mixing Ratio(Base : Hardener : Paste ) :98 parts : 2 parts (wt./Wt.)
  • Drying Time @ 30 ° C Temp. :: (Base: 98 part + Hardener Paste: 2 part) : Touch Dry :5 Minites
    Tack Free Dry :15 minites
    Sandability After :30 minites
  • Pot Life @ 30 ° C Temp (Base: 98 part + Hardener Paste: 2 part) : 3 minutes max.
  • Shelf Life : 6 months from the date of manufacturing in original tightly closed containers if kept away from direct sunlight and excessive heat.

Pack size availability:

1 KG 3.5 KG

This Information is issued by JCK Coating Industries, Bldg No.377, A-1, Sector IV, Kandla Special Economic Zone, Gandhidham (Kutch)-370 230, Gujarat, India. The technical information, recommendations and other statements contained in this document are based upon tests or experience that we believes are reliable, but the accuracy or completeness of such information is not guaranteed


Chat With Us