Apply for Agency/Distributionship

JCK Anti-Blushing Thinner


Product Code : 73300

Product Description

JCK Anti-Blushing Thinner is mixture of esters, alcohols and aromatic solvents. It is suitable as diluents for all kind of NC & PU Products were slow drying is required.

Performance Features & Benefits

JCK Anti-Blushing Thinner is compatible with all NC & PU products. It provides anti blush properties, gives smooth finishing of lacquer and helps for slow drying of products.

Recommended Usage

JCK Anti-Blushing Thinner can be used for slow drying of NC & PU based lacquers and could be spray applied in humid conditions.

Technical Data

  • Flash Point : (IS 101/1987, Part 1, Sec 6) : -4°C
  • Specific Gravity :- 0.89
  • Appearance :- Clear Liquid
  • Shelf Life: 2 Years from the date of manufacture in original tightly closed containers away from direct sunlight and excessive heat

Safety & Precautions

Kindly refer to the MSDS for JCK NC Anti-Blushing Thinner, which gives detailed information on safety measures while handling the Paint.

Store the product at ambient conditions in well ventilated locations and away from source of ignition and fire.

For Optimum performance JCK Anti-Blushing Thinner must be applied at a temperature between 20° and 40° C and humidity not above 90%.

Avoid eye and skin contact. In case of eye and skin contacts wash with plenty of clean water.

Do not inhale or ingest. In case of inhalation move to fresh air and seek medical attention.

Work in well-ventilated area.

Use protective equipments like rubber / polythene gloves, safety goggles / glasses, face mask while handling the paint.

Product is highly flammable.

Do not dispose in any drain or water-channel.

Pack Size & Shade Range

1 Ltr 4 Ltr 17 Ltr 20 Ltr 180 Ltr 200 Ltr


Information contained in this technical data sheet is believed to be reliable and given in good faith and based on our present knowledge, but no representation, guarantee or warranties of any kind are made as to its accuracy, suitability for a particular application or results to be obtained from them. The user of this material decides what safety measures are necessary to safely use this material, either alone or in combination with other materials. JCK Coating Industries cannot anticipate or control the conditions under which this information may be used. Therefore, it is user’s responsibility to satisfy themselves as to the suitability and completeness of such information for their particular use. It is the responsibility of the user to determine the final suitability of this information and data and to comply with all applicable international, federal, state, and local laws and regulations. It is the responsibility of the user to ensure that the issue is current. This information given is a non-controlled document.


Chat With Us