• Address:
    Building No: 377, Sector IV, KASEZ, Gandhidham

  • Call / Whatsapp
    +91-8113065941

Awesome Image

N.C Primer Surfacer - White - Grey - Black

JCK Wood Preservative is clear liquid with deep penetrating alkyd resin & special additive for protection of wood.

PERFORMANCE FEATURES & BENEFITS

JCK Wood Preservative is easy to apply product .It can be applied by brushing, ragging, Dipping or spraying. It stops decay of wood from micro organisms like fungus, algae and insects like termites, borers etc. Service life of wood is significantly increased with usage of wood preservatives. It is preventing graying and staining of wood

RECOMMENDED USAGE

JCK Wood Preservative can be used for preserve wooden surfaces like Veneers, Plywood, MDF, Chipboards and Natural Wood. It is recommended for applications like Home and Office furniture, Doors, Windows, Garden furniture, Fencings, Wooden Structures etc. Wooden logs can be protected from cracking and blackening with application of wood preservatives. Product can be over coated with all kind of wood finishes for aesthetic purpose..

RECOMMENDED APPLICATION PROCEDURE

Before application of JCK Wood Preservative, sand the wood surface with emery paper no. 120 to 180. Surface should be clean & free from oil, grease, loose particles, dust etc. application can be done as per the recommended application process, Apply coating as follows:-

  • The product is ready to use and does not require thinning.
  • Apply the product liberally with brush or Spray on bare dry wood. Preservative should be flooded rather than merely painted. Every Check, depression and cut end of the wood should be thoroughly flooded with preservative.
  • Allow the material to dry 12 – 24 hr. before varnishing, lacquering or painting.

TECHNICAL DATA

  • Appearance : Clear liquid form
  • Coverage* : 8 – 10 sq.mtr/ltr/coat
  • Drying Time : Dry to touch time ~ Max. 30 minutes, Recoating time ~ 12 - 24 Hrs
  • Flash Point : (IS 101/1987, Part 1, Sec 6) : above 30°C
  • Shelf Life: 1 Year from date of manufacture in original tightly closed containers if kept away from direct sunlight and excessive heat

*Actual coverage may vary from the quoted coverage due to factors such as method and condition of application and surface roughness of wood.

SFETY & PRECAUTIONS

>> Kindly refer to the MSDS for JCK Wood Preservative, which gives detailed information on safety measures while handling the product. Store the product at ambient conditions in well ventilated locations and away from source of ignition and fire. For Optimum performance JCK Wood Preservative must be applied at a temperature between 20° and 40° C and humidity not above 75%.

>> Avoid eye and skin contact. In case of eye and skin contacts wash with plenty of clean water. Do not inhale or ingest. In case of inhalation move to fresh air and seek medical attention. Work in well-ventilated area.

>> Use protective equipments like rubber / polythene gloves, safety goggles / glasses, face mask while handling the paint.

>> Product is Flammable.

>> Dispose in land filling. Do not dispose in any drain or water-channel.

>> Stir well and strain before use.

Are you looking for a best and quality service? Contact
Us Now

This Information is issued by JCK Coating Industries, Bldg No.377, A-1, Sector IV, Kandla Special Economic Zone, Gandhidham(Kutch)-370230, Gujarat, India. However JCK Coating Industries shall not guarantee for any specific product features and shall not establish a legally valid contractual relationship.