• Address:
    Building No: 377, Sector IV, KASEZ, Gandhidham

  • Call / Whatsapp

Awesome Image

Teak Oil

JCK Teak Oil is specially developed to provide an outstanding maintenance and protection of hard wood like Teak, Mahogany, Rosewood etc. which has been exposed to exterior weather conditions.


JCK Teak Oil is a unique blend of oils, which has a deep penetrating ability into wood grain. It extends the life of wood by replacing the natural oils taken away by exposure to weather conditions and sunlight. It offers a clear oiled appearance, enhancing the natural beauty of wood. It is preventing graying and staining of wood. It resists cracking or peeling. Most friendly and easy application. Restores the original appearance of wood.


JCK Teak Oil Can be use for outdoor or indoor furniture, cabinets and Garden furniture. For maintenance of any kind of unvarnished wooden furniture


Before application JCK Teak Oil sand the wood surface with emery paper no. 120 to 180. Surface should be clean & free from oil, grease, loose particles, dust etc. application can be done as per the recommended application process, Apply coating as follows:-

  • The product is ready to use and does not require thinning.
  • Stir the product thoroughly before use.
  • Apply the product in one coat by a brush or cloth and remove excess oily material by cloth for the best result.
  • Allow the material to dry minimum 2 - 3 hours to before recoating
  • It is not advisable to apply Teak Oil over pre-coated surfaces. A suitable test is strongly recommended
  • Do not apply Teak Oil over wet or damp surfaces.


  • Appearance : Liquid form
  • Color : Transparent brown toned color
  • Specific Gravity : 0.85 Kg. / Liter +/- 0.02
  • Drying Time @ 30° C : Surface Drying time – 2 Hours Tack free time – Overnight Recoating time – 2 to 3 Hours
  • Thinning : Ready to use.
  • Flash Point : 41°C
  • Shelf Life: 24 months from the date of manufacture in original tightly closed containers if kept away from direct sunlight and excessive heat


>> Kindly refer to the MSDS of JCK Teak Oil which gives detailed information on safety measures while handling the material.

>> Store the product at ambient conditions in well ventilated locations and away from source of ignition and fire

>> For Optimum performance JCK Teak Oil must be applied at a temperature between 20° and 40° C and humidity not above 75%

>> Avoid eyes and skin contact. In case of eye and skin contact, wash with plenty of clean water.

>> Do not inhale or ingest. In case of inhalation move to fresh air and seek medical attention.

>> Work in well-ventilated area.

>> Use protective equipments like rubber / polythene gloves, safety goggles / glasses, face mask while handling the material.

Dispose in accordance with national regulations. Do not dispose in any drain or water-channel.


Stir well and strain before use

Are you looking for a best and quality service? Contact
Us Now

This Information is issued by JCK Coating Industries, Bldg No.377, A-1, Sector IV, Kandla Special Economic Zone, Gandhidham(Kutch)-370230, Gujarat, India. However JCK Coating Industries shall not guarantee for any specific product features and shall not establish a legally valid contractual relationship.