• Address:
    Building No: 377, Sector IV, KASEZ, Gandhidham

  • Call / Whatsapp
    +91-8113065941

Awesome Image

JCK ANTI BLUSHING THINNER

JCK Anti-Blushing Thinner is mixture of esters, alcohols and aromatic solvents. It is suitable as diluents for all kind of NC & PU Products were slow drying is required.

PERFORMANCE FEATURES & BENEFITS

JCK Anti-Blushing Thinner is compatible with all NC & PU products. It provides anti blush properties, gives smooth finishing of lacquer and helps for slow drying of products.

RECOMMENDED USAGE

JCK Anti-Blushing Thinner can be used for slow drying of NC & PU based lacquers and could be spray applied in humid conditions.

TECHNICAL DATA

  • Flash Point : (IS 101/1987, Part 1, Sec 6) : -4°C
  • Specific Gravity : 0.89
  • Appearance : Clear Liquid
  • Shelf Life: 2 Years from the date of manufacture in original tightly closed containers away from direct sunlight and excessive heat

SFETY & PRECAUTIONS

>> Kindly refer to the MSDS for JCK NC Anti-Blushing Thinner, which gives detailed information on safety measures while handling the Paint.

>> Store the product at ambient conditions in well ventilated locations and away from source of ignition and fire.

>> For Optimum performance JCK Anti-Blushing Thinner must be applied at a temperature between 20° and 40° C and humidity not above 90%.

>> Avoid eye and skin contact. In case of eye and skin contacts wash with plenty of clean water.

>> Do not inhale or ingest. In case of inhalation move to fresh air and seek medical attention

>> Work in well-ventilated area.

>> Use protective equipments like rubber / polythene gloves, safety goggles / glasses, face mask while handling the paint.

>> Product is highly flammable.

>> Do not dispose in any drain or water-channel.

Are you looking for a best and quality service? Contact
Us Now

This Information is issued by JCK Coating Industries, Bldg No.377, A-1, Sector IV, Kandla Special Economic Zone, Gandhidham(Kutch)-370230, Gujarat, India. However JCK Coating Industries shall not guarantee for any specific product features and shall not establish a legally valid contractual relationship.